Vag Tacho 2.5 Driver Download
Vag Tacho 2.5 Driver Download
Vag Tacho is a software that allows you to read and program the EEPROM of your car's instrument cluster. It can also read and clear fault codes, reset service intervals, and perform other diagnostic functions. Vag Tacho is compatible with most Volkswagen and Audi models from 1994 to 2004.
To use Vag Tacho, you need a special interface cable that connects your car's OBD port to your computer's USB port. The interface cable is usually sold separately from the software, and it may come with a CD containing the driver software. However, some users have reported difficulties installing the driver software on newer versions of Windows, such as Windows 10.
Download: https://monsflorpdiuyu.blogspot.com/?so=2w3xGc
In this article, we will show you how to download and install the Vag Tacho 2.5 driver software for Windows 10. We will also provide some tips and troubleshooting steps in case you encounter any problems.
How to download the Vag Tacho 2.5 driver software
The Vag Tacho 2.5 driver software is not available on the official website of the software developer, OBDtool.com. However, you can find it on some third-party websites that offer free downloads of various software and drivers. One such website is APSense.com, where you can find a link to download the Vag Tacho 2.5 driver software as a ZIP file.
To download the Vag Tacho 2.5 driver software from APSense.com, follow these steps:
Go to [this page] on APSense.com.
Scroll down to the bottom of the page and click on the green button that says "Download Now".
A new tab will open with a countdown timer and a captcha code. Wait for the timer to reach zero and enter the captcha code in the box below it.
Click on the blue button that says "Create download link".
A new page will open with a link to download the ZIP file. Click on the link and save the file to your computer.
How to install the Vag Tacho 2.5 driver software
Once you have downloaded the ZIP file containing the Vag Tacho 2.5 driver software, you need to extract it to a folder on your computer. You can use any file extraction program, such as WinRAR or 7-Zip, to do this.
After extracting the ZIP file, you will see a folder named "VAG-TACHO USB 2.5". Inside this folder, you will find two files: "FTDIUNIN.exe" and "VAG-TACHO USB Driver Installation.pdf". The first file is an uninstaller for the driver software, and the second file is a PDF document that contains instructions on how to install the driver software.
To install the Vag Tacho 2.5 driver software, follow these steps:
Connect your Vag Tacho interface cable to your car's OBD port and your computer's USB port.
Wait for Windows to detect the new hardware and start the installation wizard.
Select "Browse my computer for driver software" and click "Next".
Select "Let me pick from a list of device drivers on my computer" and click "Next".
Select "Ports (COM & LPT)" and click "Next".
Select "FTDI" as the manufacturer and "USB Serial Converter" as the model and click "Next".
If Windows asks you for a file with extension ".cat", click "Skip File".
Wait for Windows to install the driver software and click "Finish".
How to verify that the Vag Tacho 2.5 driver software is working
To verify that the Vag Tacho 2.5 driver software is working properly, you need to check if your interface cable is assigned a COM port number by Windows. To do this, follow these steps:
Open Device Manager by right-clicking on the Start menu and selecting "Device Manager".
Expand the "Ports (COM & LPT)" section and look for a device named "USB Serial Port (COMx)", where x is a number.
Note down the COM port number assigned to your interface cable.
If you see the device named "USB Serial Port (COMx)" in Device Manager, it means that the Vag Tacho 2.5 driver software is working correctly. You can now run the Vag Tacho software and select the COM port number that matches your interface cable.
How to troubleshoot the Vag Tacho 2.5 driver software
If you do not see the device named "USB Serial Port (COMx)" in Device Manager, or if you encounter any errors or problems when using the Vag Tacho software, you may need to troubleshoot the Vag Tacho 2.5 driver software. Here are some possible solutions:
Make sure that your interface cable is connected securely to your car's OBD port and your computer's USB port.
Try using a different USB port on your computer, or a different interface cable if you have one.
Restart your computer and try installing the driver software again.
Run the "FTDIUNIN.exe" file in the "VAG-TACHO USB 2.5" folder to uninstall the driver software, and then reinstall it following the steps above.
Update your Windows system and install any available updates for your USB drivers.
Contact the seller or manufacturer of your interface cable and ask for technical support or a replacement.
Conclusion
Vag Tacho is a useful software for reading and programming the EEPROM of your car's instrument cluster. However, it requires a special interface cable and a compatible driver software to work with Windows 10. In this article, we showed you how to download and install the Vag Tacho 2.5 driver software for Windows 10, as well as how to verify and troubleshoot it. We hope that this article was helpful and that you were able to use Vag Tacho successfully on your Windows 10 computer.